Shenzhen LIDEMING Technology Co.,Ltd


Home > Knowledge > Content
Reflective safety raincoat use common sense
Aug 03, 2018

When it comes to reflective safety raincoats, most people think of wearing high-temperature, wild-life, waterproof, and other special people to protect the clothing. Next, I will elaborate on what is the safe use of reflective safety raincoats? What do you pay attention to when using reflective safety raincoats? What is the accurate use of reflective safety raincoats?

Pre-stage of safe use of reflective safety raincoats

Before wearing, we must have the practicality of the reflective safety raincoat, and whether the reflective safety raincoat can be in perfect condition.

Surface inspection; look at the surface of the reflective safety raincoat for pollution, whether the seam can be cracked, and whether the clothes are broken. For airtight reflective safety raincoats, a special airtightness tester is used to regularly perform airtightness testing (once every six months) so that reflective safety raincoats can be used in emergency wear. Checking before wearing is very important. If it is judged by experience alone, it is considered to be a safe device, and in fact, it is not safe, and severe damage can be formed.

The size is accurate; the size of the reflective safety raincoat should be reconfirmed before wearing. It is suitable for my size. If it is too big or too small, it will cause inconvenience in the workflow or unexpectedly hang and tear. Remove sharp objects Remove unnecessary keys, knives, pens, etc. from your body to avoid the formation of reflective safety raincoats at work.

Choose the occasion; the dressing room is an ambition of dressing, if not in a relatively unpolluted environment. Under emergency relief conditions, the dress should be carried out in a cold zone.

Other necessary auxiliary systems Before using chemical reflective safety raincoats, ensure that other necessary auxiliary systems such as gas supply equipment and decontamination equipment are ready to stop.

Safe use of reflective safety raincoats

Reflective safety raincoats should be worn in accordance with affirmative rules, such as to be able to cover the accuracy and speed of wearing reflective safety raincoats, to promote the effect of reflective safety raincoats at work, and to safely take off the foundation after use. Ordinary should follow the rules of the trouser legs - boots - tops - masks - hats - zippers - gloves. Finally, in order to improve the tightness of the entire system, it is possible to apply tape to the openings (such as sills, cuffs, trousers, masks and reflective safety raincoat hooded interfaces. In order to strengthen the hand protection, you can choose to wear two layers of gloves and so on. In the entire process, it is necessary to prevent the inner layer of the reflective safety raincoat from going through the external environment, so as to prevent the reflective safety raincoat from being contaminated at the beginning.

The use of reflective safety raincoats at work

In the work process, it is necessary to pay attention to the traffic police or the sanitation work. When the reflective safety raincoat is continuously polluted, it must be replaced within the regular protection period. If the reflective safety raincoat is damaged, it should be replaced immediately.

For airtight reflective safety raincoats or non-hermetic reflective safety raincoats with good sealing performance, due to the relatively severing space work, the regulations of the two people are followed, that is, at least two people enter the work area together, in preparation for Real-time relief in case of an attack.

Accurate wear and tear order of reflective safety raincoats

The requirement to take off the reflective safety raincoat is to safely take off the reflective safety raincoat and cause pollution to the human body and the environment. It is exaggerated and important, but it is often overlooked that it is necessary to carry out the necessary cleaning and decontamination before taking off the reflective safety raincoat. The washing and decontamination mentioned here is only for the purpose of safely taking off the reflective safety raincoat without contaminating the wearer or the environment, and not for the re-use of some reflective safety raincoats. Depending on the difference in contaminants, decontamination can be as simple as a bucket of water to remove common contaminants or to take some cleaning agents for rinsing. Then rinse with water. This can avoid high heat damage to the reflective safety raincoat, which in turn creates pollution and harm to the wearer.

What is to be clarified here is that in the case of airtight or liquid-tight reflective safety raincoats, which are worn in a confusing and cumbersome reflective safety raincoat, both wear and tear are sponsored by another assistant who can assist the wearer in some mediation and pulling. Difficult work such as zippers, and the ultimate check of the environment after the entire reflective safety raincoat is put on. When assisting in taking off the reflective safety raincoat, the assistant should also perform proper protection to avoid contamination because of the ability to experience the pollutants.


Everyone who needs to wear a reflective safety raincoat must be trained beforehand, which can be carried out by a provider of reflective safety raincoats or by experienced staff. In addition to all the things mentioned above, the need to exaggerate the need to keep the reflective safety raincoat tightly worn (zippered, open and connected with other protective equipment, etc.) is about the importance of safety, because it is worn every day. This is not very comfortable for workers in reflective safety raincoats, but it is of the utmost importance to carry out the best results in the entire protective system. It is vital that the safety is the first priority. At this time, the protection needs to be re-thinking when it is needed.

As for emergency relief, there is a need for practice in addition to training. It can make the wearer familiar with the wearing and function of various protective articles, and can be familiar with the partner in the situation of wearing reflective safety raincoat, especially the airtight reflective safety raincoat.

Because training and practice are harmful to chemical reflective safety raincoats, the formation of airtight reflective safety raincoats can be ineffective, while airtight reflective safety raincoats are very expensive. Some manufacturers (such as DuPont) can provide the same materials. The special training suits of the same plan are cheaper than the ones. It is also capable of accepting obsolete or ineffective reflective safety raincoats for exercise, provided that there are no pollutants that are toxic to the human body on reflective safety raincoats.

Related Industry Knowledge